Options And Accessories - Hatco Toast-Qwik TQ-10 Série Manuel D'installation Et D'utilisation

English
Security Cover
The lockable security cover flips up and down to limit access
to the control panel.
1. Remove the crumb tray.
2. Remove the two front screws on the platform above the
controls.
3. Position the security cover over the control panel, aligning
the mounting holes on the security cover with the screw
holes on the platform.
4. Reinstall the two screws through the security cover and
into the platform. Tighten securely.
5. Reinstall the crumb tray.
Extended Feed Guide
The extended feed guide accessory adds 3" (76 mm) to the
feed ramp (not available for TQ-1800 models).
Automatic Power Save Mode
The optional automatic Power Save mode feature switches to
power save mode after 30 minutes of inactivity (not available
for TQ-10 models).
30 Amp Cord (TQ-800 Models)
An optional 30 Amp cord (NEMA 6-30P plug) is available for
208 volt TQ-800 models only.
Receptacles
Receptacles are available as accessories for units using
NEMA 5-20P, NEMA 6-20P, or NEMA 6-30P plugs.
Form No. TQ2M-1121

OPTIONS AND ACCESSORIES

Platform
Screw
Security
Cover
Platform
Lockable security cover
flips up and down.
17
Security Cover