OPTIONS AND ACCESSORIES
Security Cover
The lockable security cover flips up and down to limit access
to the control panel.
1. Remove the crumb tray.
2. Remove the two front screws on the platform above the
controls.
3. Position the security cover over the control panel, aligning
the mounting holes on the security cover with the screw
holes on the platform.
4. Reinstall the two screws through the security cover and
into the platform. Tighten securely.
5. Reinstall the crumb tray.
Installing the Security Cover
Bun Feed Ramp
A bun feed ramp adds extra feeding area for bun products that
are up to 40 mm (1-1/2") thick.
10
Form No. TM3CEM-0119