Medion LIFE X44038 Mode D'emploi page 205

 Select "Geotagging" from the app menu on your smartphone.
 Switch on your GPS on your smartphone.
 Start the "LifeCam" application on your smartphone and click
on the "Geotagging" option.
 Click the red button in the "Geotagging" window. The cam-
era will synchronise with the smartphone; the smartphone
will then begin with the recording of GPS data for each pic-
ture you take. The camera will return to the remote control
window. Press the same button again to stop the inclusion of
GPS data.
 Press the Wi-Fi button to disconnect the camera from the
smartphone. During this time, you can take pictures and vid-
eos with the camera as normal. The "LifeCam" application on
your smartphone will inform you about the disconnection.
Click OK to confirm but do not stop the GPS data recording of
the "LifeCam" application.
 Use the "GPS-Daten herunterl. " function after taking the pho-
to to import location information from the smartphone and
save it in the photo.
NOTE!
Use this together with the "DOWNLOAD
GPS-DATA" function to show the location informa-
tion in the properties of the photo.
Downloading GPS data
Follow the steps below to run the "DOWNLOAD GPS-DATA"
function:
 Select "DOWNLOAD GPS-DATA" from the Wi-Fi menu
on the camera.