babymoov Premium Care Notice D'utilisation page 22

Masquer les pouces Voir aussi pour Premium Care:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
4. Once it receives a signal from the BU, the visual level meter (25) will light up. The number of segments being
lighted up vary along with the sound. This feature is useful in case the parents prefer to turn down the
speaker volume to keep the environment quiet. Depending the signal is coming from which BU, the
corresponding baby unit no. icon 1 33 or 2 34 will be lighted up.
5. Short press the power ON/OFF button (18) to light up the touch key icons
up/down icons
as well as the temperature indicator (26) will change during adjustment. The more segments lighted up and
higher the number, the bigger is the loudness. There are total 5 levels of loudness. When the minimum level
is reached, further touch of the down icon
mute icon
will show up.
6. This unit is equipped with a vibration alert. Short touch the vibration icon
up. Once the received baby's voice is loud enough, the vibrator starts to function. This feature is useful when
the parent is working under noisy environment (e.g. vacuum cleaning). To save battery power, it is recommended
not to use the vibration alert frequently. To switch off vibration, short touch the vibration icon
and the icon
(29) goes off.
7. If the unit is paired to work with two BU, BU no.1 always has priority. This means while the unit is listening
to signal from BU no. 2, in case BU no. 1 starts transmitting, the unit will immediately switch listening to BU
no.1 until it stops to transmit, then the unit will switch back listen to BU no. 2.
8. To avoid parent missing attendance to BU no.2, while the unit is listening to signal from BU no.1, in case BU
no.2 starts to transmit, the baby unit no. icon 2 (34) will go flashing to alert the parent. If parent prefers to
listen to BU no. 2, he can short press the power ON/OFF button
BU no. 2. The baby unit no. icon 2 (34) will become lighted up steady while baby unit no. icon 1 (33) will go
flashing (if baby 1 continues to cry). Further short press of button (18) will switch back to listen to BU no. 1
again. Under such arrangement, the parent is able to monitor both babies.
9. Under standby mode, if there are two BU, the unit will alternately scan each BU for 15 sec with the BU no.
icons 33 and 34 alternately show up. When either one of the BU starts to transmit, the unit will immediately
listen to that BU until the signal goes off (or switch listening to signal from BU with higher priority). Short press
the power ON/OFF button
automatically
22
PU is receiving
PU is
PU is receiving
r
c e
c
eiving
signal from BU no. 1
si
signal from BU no. 1
g
nal f
o r
om BU n
(19) or (20) to adjust the volume of speaker (24), the segments of visual level meter (25)
(18) to light up the temperature indicator (26). After 20 sec, it will go off
BABYPHONE PREMIUM CARE • Instruction manual
o
. 1
(19) will totally mute the speaker (24) volume and the speaker
PU is receiving
PU is
PU is receiving
r
c e
eiving
signal from BU no. 2
si
signal from BU no. 2
g
nal f
r
om BU n
. Short touch the
(22) and the icon
(18) and the unit switches listening to
o
. 2
(29) will show
(22) again

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A014201

Table des Matières