Preparing Coffee Or Espresso; Preparing Coffee With Coffee Powder (Ground Coffee) - SEVERIN Piccola Semplice Mode D'emploi

2. Fill the bean container with coffee beans (fi g. 4). Always ensure there
are enough beans in the container.
NOTE!
Do not use caramelised coffee beans!
3. Close the cover of the bean container.

6.3.1 Preparing coffee or espresso

To prepare a coffee or espresso, there must be enough beans in the bean
container and enough water in the water tank.
1. Put a cup on the tray under the outlet and adjust the height to that
of the cup (fi g. 5).
2. Use the arrow keys to select
coffee
3. If desired, you can use the button under the display fi eld
• to change the set coffee strength
• to change the set water quantity.
NOTE!
To prepare the coffee speciality with your own
settings, press the respective button until
displayed after the corresponding symbol (►"7.2
Making individual settings for coffee preparation").
4. Confi rm by pressing the OK button.
The desired coffee speciality is being prepared.
Â
5. To change the coffee quantity during dispensing, use the arrow keys
while the process is going on.
The display shows a bar with the set quantity in "ml".
Â
The coffee dispensing stops automatically after the selected
quantity has been prepared. It can also be stopped early by
pressing the OK button.
Version 2 2014-11
or .
esPresso
is
6.4 Preparing coffee with coffee powder
You can also prepare a coffee speciality with coffee powder. This
is especially useful if you want to prepare a decaffeinated coffee,
for example.
CAUTION!
Incorrect fi lling can damage the device.
– Only add coffee when the device asks you to.
– Only add coffee made of ground beans (no
instant beverage powder, coffee granules,
cocoa, etc.).
– Fill the powder chamber with ground coffee, up
to a maximum of 10 g.
– Fill the powder chamber only once for each cup
portion, not multiple times.
1. Proceed as described in the section ►"6.3.1 Preparing coffee or
espresso" to select the desired beverage.
2. Instead of selecting the strength of the coffee, use the button under the
display fi eld to select the symbol
3. Once the desired quantity of water has been selected (if applicable),
press OK.
After a short time, the display shows:
Â
Please fill coffee grounds
4. Open the powder chamber and put in the required amount of ground
coffee. (fi g. 6)
5. Close the powder chamber.
6. Press OK again.
The desired coffee speciality is prepared.
Â
.
.
39
GB