Energy Savings Options; Resetting The Device - SEVERIN Piccola Semplice Mode D'emploi

• , if you do not want to use a water filter
no
and press OK to confirm.
4. Follow the steps in section ►"8.2.4 Changing water filter.

7.3.4 Energy savings options

The appliance has an automatic power-off function. You can set this time
limit individually this way.
Here's how to set the energy savings options:
1. Press the menu button and use the arrow keys to select the menu
option
.
device menu
2. Then select the
auto Power-off
menu option.
The display shows the currently-set time for the automatic power-
Â
off.
3. Use the arrow keys to change the setting and
• confirm by pressing OK, or
• cancel the change with the button under the display field

7.3.5 Resetting the device

You can reset the device to the factory settings. All personal settings for
coffee preparation will be lost, and the device starts once again with the
commissioning (►„5. Switching on for the first time").
Resetting the device via the menu
Here's how to reset the device to the factory settings:
1. Press the menu button and use the arrow keys to select the menu
option
.
device menu
Version 2 2014-11
2. Then select the
factorY settings
menu option.
The display shows:
Â
reset to default
3. Press
• the button under the display field
factory settings or
• the button under the display field
personal settings.
For a short while, the display shows the note:
Â
device set to factorY defaults
All programmed values are now reset. All basic settings must now
be adjusted again.
(►„5. Switching on for the first time").
Resetting the device in case of incorrect language setting
If you have accidentally set an incorrect language and a resetting via the
menu is not possible, you can also reset the device to the delivery state as
.
follows:
1. Switch the appliance off.
2. Press the outer two buttons below the display and hold them down.
3. Switch the appliance on and continue to hold the buttons down until the
message
device set to factorY defaults
appears on the display.
All programmed values are now reset. All basic settings must now
Â
be adjusted again.
(►„5. Switching on for the first time").
GB
if you want to call up the
if you want to keep your
.
43