WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The touch-activated electronic controls offer a variety of heat
settings for optimal cooking results.
Cooktop Area
A. Front cooking area
B. Rear cooking area
Display Icon
Function
0
Zero
1–9
Power level
Flashing U
No pan
detected
HOT
Hot Surface
indicator
P
Performance
Boost
U
Keep Warm
| |
Pause
A
Auto Cooking
E
Error message There is an electronic failure.
L
Cooktop
Lockout
Cooktop Controls
Description
The cooking area is activated.
The cooking area is on
at this power level.
No pan, or the pan is
not compatible.
NOTE: A "U" and a "∩"
indicates the bridging of the
two elements. Alternating
Upside down U and 9 if
cookware is detected only rear
cooking area (patched zone).
The cooktop surface is hot.
The Performance Boost
function is on.
The Keep Warm function is on.
The cooktop zone is paused.
The Automatic Cooking
function is on.
The cooktop will be locked out,
and the cooking areas cannot
be turned on by the cooktop
touch controls.
To Use
To Turn On the Cooktop:
1. Touch the Power keypad.
The indicator light above the Power keypad will light up to
indicate that both cooking areas are ready to be activated.
Inactivity to the control for 10 seconds after the main power
has been turned on will automatically turn off power to the
cooktop.
To Turn On a Surface Cooking Area (Front or Rear):
1. Touch the On/Off keypad for the desired cooking area. This
will turn that cooking area on and the "On" indicator will light
up. The current power level will be indicated above the slider.
2. Select a power level from "1" to "P" by touching or sliding on
the power slider. The power setting will appear in the cooking
area display as you move your finger up or down the slider.
The power sliders consist of nine positions plus Keep
■
Warm (U) and Performance Boost (P) positions.
If the cooking area power level is at "0" for 10 seconds,
■
the cooking area will automatically turn off.
5