Cooktop Controls - Electronic Touch Controls; Cooktop Controls - Jenn-Air JEC3430HS Guide D'utilisation Et D'entretien

COOKTOP CONTROLS – ELECTRONIC TOUCH CONTROLS
Wi-Fi Connectivity
Connect to Network: Download the JennAir
■
app store on your mobile phone. See the Connectivity Setup
sheet for more detailed instructions.
SAID Code: The SAID code is used to sync a smart device
■
with your appliance.
The SAID code plate is located on the metal cabinet
underneath the cooktop. See the following illustration.
A. Model/serial number plate
B. SAID code for Wi-Fi connection
MAC Address: MAC Address is displayed for the Wi-Fi
■
module.
Wi-Fi Radio: Turn Wi-Fi on or off.
■
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The electronic touch controls offer a variety of heat settings
for optimal cooking results.
For maximum element operation, all cooktop electronic touch
controls can be set to High when bringing liquids to a rapid boil.
When the cooktop is turned on or after power is restored to the
cooktop after a power failure, all temperature setting lights will
glow for 10-15 seconds. After the lights go off, the cooktop is
ready to use.
To Use:
1. Touch the On/Off keypad for the desired element.
2. Touch the "+" (plus) or "-" (minus) keypad to select the power
level.
NOTE: Press and hold the "+" (plus) or "-" (minus) keypad for
a few seconds to quickly scroll through the power level. If a
power level is not selected within approximately 10 seconds,
the element will not turn on.

Cooktop Controls

app from the
®
B A
3. To change the power level while cooking, select a power level
with the "+" (plus) or "-" (minus) keypad.
4. When finished cooking, touch ON/OFF for the desired element
to turn off surface cooking area(s) individually or touch the Off
keypad to turn off all surface cooking areas at once.
Use the following chart as a guide when setting heat levels.
Setting Recommended Use
High Start food cooking.
■
10 BOIL
Bring liquid to a boil.
■
Hold a rapid boil.
Medium High
■
08-09
Quickly brown or sear food.
■
Maintain a slow boil.
Medium
■
06-07
Fry or sauté foods.
■
Medium Low Cook soups, sauces, and gravies.
■
04-05
Stew or steam food.
■
Provide lowest simmer/heat setting.
Low
■
03 SIMMER
Simmer (range of simmer temperatures).
■
Keep cooked foods warm.
Keep Warm
■
02 K. WARM
Melt chocolate and butter.
Melt
■
01 MELT
Dual/Triple Home canning
■
Elements
Large-diameter cookware
■
Large quantities of food
■
REMEMBER: When cooktop is in use, the entire cooktop
area may become hot.
Hot Surface Indicator Lights
An "H" will appear in the surface cooking area display as long as
any surface cooking area is too hot to touch, even after the
surface cooking area(s) is turned off.
A. Hot surface indicator
Cooktop On Indicator Light
The cooktop has a Cooktop ON indicator light. The light will glow
when any of the elements are ON.
The element display will show the current power level when that
element is On and a power level is selected.
5