Cooktop Controls - Electronic Touch Controls; Cooktop Controls - Jenn-Air JED4430KS Guide D'utilisation Et D'entretien

COOKTOP CONTROLS – ELECTRONIC TOUCH CONTROLS
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
The electronic touch controls offer a variety of heat settings
for optimal cooking results.
For maximum element operation, all cooktop electronic touch
controls can be set to High when bringing liquids to a rapid boil.
When the cooktop is turned on or after power is restored to the
cooktop after a power failure, all temperature setting lights will
glow for 10-15 seconds. After the lights go off, the cooktop is
ready to use.
To Use:
1. Touch ON/OFF for the desired element.
+ -
2. Touch the (plus) or (minus) keypad to select the power
level.
NOTE: Press and hold the
quickly scroll through the power level. If a power level is not
selected within approximately 10 seconds, the element will
not turn on.
3. To change the power level while cooking, select a power level
+ -
with the or keypad.
4. When finished cooking, touch ON/OFF for the desired element
to turn off surface cooking area(s) individually or touch OFF to
turn off all surface cooking areas at once.

Cooktop Controls

+ -
or keypad for a few seconds to
Use the following chart as a guide when setting heat levels.
Setting Recommended Use
High
Start food cooking.
■
20 BOIL
Bring liquid to a boil.
■
Medium High Hold a rapid boil.
■
17-19
Quickly brown or sear food.
■
Medium
Maintain a slow boil.
■
10-16
Fry or sauté foods.
■
Medium Low Cook soups, sauces, and gravies.
■
04-09
Stew or steam food.
■
Low
Provide lowest simmer/heat setting.
■
03 SIMMER
Simmer (range of simmer temperatures).
■
Keep Warm Keep cooked foods warm.
■
02 K. WARM
Melt Melt chocolate and butter.
■
01 MELT
Dual/Triple Home canning
■
Elements
Large-diameter cookware
■
Large quantities of food
■
REMEMBER: When cooktop is in use, the entire cooktop
area may become hot.
Hot Surface Indicator Lights
An "H" will appear in the surface cooking area display as long as
any surface cooking area is too hot to touch, even after the
surface cooking area(s) is turned off.
A. Hot surface indicator
Cooktop On Indicator Light
The cooktop has a cooktop on indicator light. The light will glow
when any of the elements are on.
The element display will show the current power level when that
element is on and a power level is selected.
5