Assembly/Connection - Becker Centronic SensorControl SC43 Notice De Montage Et D'utilisation

Assembling SC43 to the time switch for light sensors Centronic Time-
Control TC52 / radio-operated time switch for light sensors Centronic
TimeControl TC511
Connection to device
1..Cut.the.wire.to.the.desired.length.(e.g..using.a.diagonal.cutter)..
..Bare.about.5cm.of.the.wire.
3..Insert.the.wire.into.the.terminal.
4..Insert.the.terminal.into.the.receptacle.(see.diagram).
Window assembly for SC43:
Please.clean.the.pane.thoroughly.before.mounting.the.sensor.
Attach.the.SC43.to.the.window.using.the.suction.cap.

Assembly/Connection

DE
GB
FR
NL
13