Using The Machine; Brewing 1 Or 2 Cups Of Espresso Or Regular Coffee - Gaggia Milano BESANA Mode D'emploi

4219-465-00621 MANUAL GAG. BESANA HD8651 EN-FR-ES 120US.indd 17
4 Place the filter in the empty water tank. Press it down until it cannot move any
further.
5 Fill the water tank with fresh water up to the MAX indication and slide it into the
machine.
6 Let the machine brew hot water until the water tank is empty (see chapter
'Using the machine', section 'Hot water').
7 Refill the water tank with fresh water up to the MAX indication and slide it back
into the machine.
-
The on/off button lights up continuously.
The machine is ready for use.

Using the machine

To guarantee perfect espresso, the machine regularly rinses its inner circuit with
water. This automatic rinsing cycle takes place 15 minutes after the appliance
switches to standby mode or switches off. During the automatic rinsing cycle,
some of the water flows through the inner circuit directly into the drip tray. Empty
the drip tray regularly.

Brewing 1 or 2 cups of espresso or regular coffee

1 Make sure the on/off button lights up green continuously and the control dial
points to the coffee bean icon.
2 Place 1 or 2 cups on the drip tray grid.
3 Press the espresso button or regular coffee button.
Note: You can interrupt the brewing cycle at any time. To do this, press the same
button (for espresso or regular coffee) that you pressed to start brewing coffee.
ENGLISH
17 17
14/10/2019 09:21:20