Installation Requirements; Key Dimensions And Specifications; Choose The Proper Location; Flooring - Kenmore 796.4126 Série Mode D'emploi

KEY DIMENSIONS AND SPECIFICATIONS

Description
Electrical Requirements
Max. Water Pressure
Dimensions
Net Weight

CHOOSE THE PROPER LOCATION

WARNING
Failure to do so may result in damage to property or
serious bodily harm.
death.
electric shock, or death.
Failure to follow this warning can cause serious
Power Outlet
The power outlet must be within 60 in. (1.5 m) of either
side of the washer.
The appliance and outlet must be positioned so that
the plug is easily accessible.
Do not overload the outlet with more than one
appliance.
The outlet must be grounded in accordance with
current wiring electric codes and regulations.
Time-delay fuse or circuit breaker is recommended.
NOTE: It is the personal responsibility and obligation of
the product owner to have a proper outlet installed by a

FLOORING

To minimize noise and vibration, the washer MUST be
right.
Allowable slope under the entire washer is a maximum 1
back.
Installing on carpeting and soft tile surfaces is not
recommended.
Never install the washer on a platform or weakly
supported structure.

INSTALLATION REQUIREMENTS

Front-Loading Washer
120 VAC, 60Hz
20 - 120 psi (138 - 827 kPa)
3
27 in. (W) X 29 /
68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 132.2 cm (D, with door open)
196.2 lbs (89 kg)
Failure to follow this
Failure
Failure to follow this warning
11
in. (D) X 38 / in. (H), 52 in. (D, with door open)
4 16

CLEARANCES

Allow at least 22 ¼ in. (56.6 cm) in front of the washer
to open the door.
1
22 / in.
4
(56.6 cm)
allow minimum clearances of at least 1 in. (2.5 cm) at the
sides and 4 in. (10 cm) behind the unit. Be sure to allow
required clearances.
1 in.
(2.5 cm)
NOTE:
support the weight of the washer, when fully loaded,
reinforce it to make it more rigid.
not be rigid enough for a front loading washer, due to the
solid, your washer may vibrate and you may hear and feel
the vibration throughout your house.
7
4 in.
3
29 / in.
4
(10 cm)
(75.6 cm)
52 in.
(132.2 cm)
1 in.
27 in.
(2.5 cm)
(68.6 cm)