Cycle Modifier Buttons; Spin Speed - Kenmore 796.4126 Série Mode D'emploi

HOW TO USE

CYCLE MODIFIER BUTTONS

Each cycle has default settings that are selected
automatically. You may also customize these settings
value is lit. The washer automatically adjusts the water
level for the type and size of wash load for best results
nature of this product, water levels may be much lower
than expected. This is normal operation and cleaning/
rinsing performance will not be compromised.
A WASH TEMP
Wash Temp selects the wash and rinse temperature
combination for the selected cycle. Press the Wash
Temp button until the indicator light for the desired
setting is lit.
Select the water temperature suitable for the type
of load you are washing. Follow the garment fabric
care labels for best results.
Warm rinses are regulated at approximately 86ºF
(30ºC).
Warm rinses leave the clothes dryer than cold
rinses, but will result in increased energy
consumption and greater wrinkling of clothes.
Cold rinses use less energy. The actual rinse
temperature depends on the temperature of the
cold water at the faucet.
NOTE: To protect your garments, not every wash
temperature, spin speed, soil level, or option is available
with every cycle. A chime will sound and the LED will not
light if a selection is not allowed.
A
B C
B
C
D
20
D

SPIN SPEED

Higher spin speeds extract more water from clothes,
reducing drying time and saving energy.
Press the SPIN SPEED button until the desired speed
is selected. Some fabrics, such as delicates, require
a slower spin speed. To protect your clothing, not all
spin speeds are available for all cycles.
Press the POWER button to turn ON the washer.
Press the SPIN SPEED button to select the desired
spin speed. For drain only, select the
NO SPIN option.
Press the START/PAUSE button. The water will
drain and the clothes will tumble before
the spin routine begins.
Adjusting the soil level setting will modify the cycle
to allow more time for heavily soiled clothes or less
time for lightly soiled clothes. Press the SOIL LEVEL
button until the desired soil level is selected.
CHIME
Press repeatedly to adjust the volume of the chime
and keypad tones. You may turn the end-of-cycle
chime and keypad tones ON or OFF with the CHIME
button.