Cleaning The Drain Pump Filter - Kenmore 796.4126 Série Mode D'emploi

CARE AND CLEANING
MAINTENANCE (continued)

Cleaning the Drain Pump Filter

excess lint and foreign objects like buttons, keys, and
coins from causing damage to the pump. If the washer
fails to drain properly, unplug the washer and allow the
water to cool, if necessary, before proceeding.
Drain Hose
Unclip the drain hose and pull it out. Place the end
Make sure not to pull the hose out too far, or it may
not drain properly.
Plug
Remove the plug from the drain hose, and allow the
3
water to drain completely.
NOTE: If there is a large amount of water in the drum,
you may have to empty your container several times.
4
Remove any lint and foreign objects from the pump
clockwise to secure. Be sure to close the drain pump
26
Pump Filter