Maintenance; Cleaning The Water Inlet Filters - Kenmore 796.4126 Série Mode D'emploi

MAINTENANCE

Cleaning the Water Inlet Filters

be plugged by hard water scale, sediment in the water
supply, or other debris.
NOTE: The inlet screens protect the delicate parts of the
inlet valve from being damaged by particles that could
enter the valves with the water supply. Operating the
damage.
Turn OFF both water faucets completely. Unscrew
the hot and cold water lines from the back of the
washer.
IMPORTANT: ONLY use the inlet hoses provided with this
laundry product. Aftermarket hoses are not guaranteed
correctly and could cause leaks. Subsequent damage to
product or property will not be covered under the terms
of the product warranty.
and soak them in white vinegar or a lime scale
remover, following the manufacturer's instructions. Be
3
back into place.
4
water lines by running several gallons of water
through the hoses and into a bucket or drain.
25
CARE AND CLEANING
Inlet Filter