Installation Requirements; Permanent Installation; Tools And Parts - Kenmore 110.44422610 Guide D'utilisation Et D'entretien

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Portable Installation
Parts supplied:
Flat washers for faucet
adapter and fill hoses
Faucet adapter
Hose bracket
Tools needed for installation:
Pliers that open to
1 9 ⁄ " (3.95 cm)
16
Flashlight (optional)
4
Silver, double-wire hose clamp
(for bottom of drain hose)
Fill-and-drain hose
Valve cap
Utility knife

Permanent Installation

Parts needed (not provided with washer):
Inlet hoses with flat washers
Parts supplied:
Drain hose with clamp
Leveling feet
Tools needed for installation
Pliers that open to
1 9 ⁄ " (3.95 cm)
16
Flashlight (optional)
Measuring tape
Level
NOTE: Replace inlet hoses
after 5 years of use to reduce
the risk of hose failure.
Record hose installation or
replacement dates for future
reference.
Cable tie
Utility knife
Adjustable or open-end
wrench ⁄ " (14 mm)
9
16
Phillips screwdriver