Technical Features; Before Use - Lagrange Maybaum R2 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
OPERATING INSTRUCTIONS

TECHNICAL FEATURES

Common features for all models:
• Thermoplastic pillars
• 3 tight glass plates
• On-off switch with indicator lamp
• Firmly attached connection cable
Features according to model:
Model Raclette 8
- 8 non-stick coated raclette pans
- Pillars made of varnished steel
- Power: 1100 watt 230V 50Hz
Model Raclette 6
- 6 non-stick coated raclette pans
- Power: 850 watt 230V 50Hz
Model Raclette 4
- 4 non-stick coated raclette pans
- Pillars made of varnished steel
- Power: 600 watt 230V 50Hz
Model Raclette 2
- 2 non-stick coated raclette pans
- Pillar made of varnished steel
- Power: 350 watt 230V 50Hz
Connection cable:
The connection cable of the appli-
ance has to be checked carefully
before each use. Do not use the
appliance if the cable is damaged.
To avoid all danger, it has to be
repaired by an authorised customer
service or a competent qualified
electrician.
The appliance conforms to direc-
tives 2006/95/EC, 2004/108/EC,
DEEE 2002/96/EC, RoHS 2002/95/EC
and the EC regulation
concerning foodstuff suitability
1935/2004.
PROTECTION OF THE ENVIRON-
MENT – DIRECTIVE 2002/96/EC
In order to preserve our environ-
ment and protect our health, very
precise rules have to be observed
with regard to the disposal of
electric appliances, for which the
cooperation of each and every one
of us – supplier and customer - is
needed. For this reason,
as indicated by the symbol
on the rating label, your
appliance should not be disposed
of in a public or private dustbin for
household waste.
To dispose of your appliance, you
can bring it back to the store where
you bought it or you can take it to
a collection point for the sorting
of domestic waste, so that it can
be recycled and reused for other
applications.

BEFORE USE

Please read the instruction manual
carefully and keep it for future
consultation.
• Always fully unwind the connection
cable.
• Connect the plug of the connection
cable to an earthed wall socket of
10/16 A.
• If an extension cord is needed,
use one with earth wire and with
a wire cross-section of at least
2
0.75 mm
.
• Take all necessary precautions to
prevent the connection cable or
extension cord from being tripped
over.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Maybaum r4Maybaum r6Maybaum r8

Table des Matières