Installation Completed; Minor Damage; Optional Extras - Jøtul S71 Manuel D'installation Et D'utilisation

ENGLISH
Fig.18
L
The insert can be adjusted vertically with levelling screws. See
Fig. 26 in the Installation and Operating Instructions for Jøtul
I 520.
108

5.0 Installation Completed

Refer to the "Installation manual with technical data" for
Jøtul I 520 (cat. no. 10044945) for the use and maintenance
of the product!
Y
NB: On delivery, the surround may have certain small
visible scratches running across the prime coat. These
are only cosmetic and do not impair the characteristics
of the product. The scratches will be closed once the
surround is painted after installation.
5.1 Painting
The product can be painted on the day after installation. Use
water-based paint. If you want to create some surface texture,
mix some tile cement into the paint.
M

5.2 Minor Damage

Once the insert has been installed, any nicks or irregularities
in the concrete should be fi lled using the cement fi ller included
in the kit.
•
•
•
•
•
•

6.0 Optional extras

Steel fl oor plate in front of the product
Cat. no. 51047337 (NO/SE)
Cat. no. 51046304 (DE)
Glass fl oor plate in front of the product
Cat. no. 50047338 (NO/SE)
Cat. no. 50047517 (DE)
Outside air connection
Cat. no. 51047509
Bottom plate
Cat. no. 10047361
Heat-storage stone system
Cat. no. 10026701
To achieve the best result, the surround should be rubbed
down with fi ne sandpaper, smoothing any unevenness or
sharp edges prior to painting.
Then apply one coat.
Mix the powder (cement fi ller) with water to form a smooth
paste (like toothpaste).
Smooth away any unevenness, allow to dry and then rub
down with fi ne sandpaper.
If the hole is deep, we recommend applying the fi ller in two
stages to prevent it from sinking.
Apply a second coat of the desired colour.