emerio MIS-123774.1 Mode D'emploi page 6

Control panel & Digital display
1. On/off button
2. Speed button
3. Swing button
4. Mode button
5. Timer button
6. Mist button
7. Normal mode
8. Natural mode
9. Sleeping mode
10. Timer function
11. Mist function
12. Water shortage
Remote control
This unit has a remote control. Please use 2x1.5V AAA batteries for this remote control. Please insert the
batteries to the remote control tightly. If it is not in use for a long time, please take the batteries out of the
remote control. The functions of the remote control buttons are the same as the functions of the buttons on
the control panel.
OPERATION
Water tank is located at the front of the body. (Fig.1)
Fill the water tank with cold water before use. (Fig.2)
Connect the appliance to a suitable power source. Then press the control panel or the remote control to
choose your desired functions.
1. On/off button: Press "
Mode: normal / Timer: off / Swing: off / Mist: off.
Press " " again to turn off the appliance. The appliance will be in standby mode.
In standby mode, the unit will retain speed setting and swing function of the former settings when turn on
the unit again; but if you pull out the plug from the socket, the former settings will all be lost.
Fig.1
" to turn the appliance on. It will work with the following presetting: Speed: 1 /
- 5 -
Fig.2