Programmable Options - Franke SMART FMO 45 GN 86 WH Manuel D'installation Et Mode D'emploi

EN
Semi automatic cooking
This cooking program is intented to start
cooking immediately for a specified duration.
After the oven is set to the desired function
and Temperature via the oven knobs:
X Z
Press the
will flash on the screen and
duration of cooking will show on the screen
one after another.
X Z
Using
cooking duration.
X Z
After 6 seconds of the last button push
or by pressing
is completed.
the screen and the display shows
the current time of day.
Full automatic cooking
This cooking program is intented to perform
a delayed cooking by programming the time
of day, when the food should be ready.
in other words, the oven will start cooking not
immediately but will automatically calculate
the time to start cooking.
X Z
Perform step 1 and 2 of the semi auto
cooking as above
duration adjustment).
X Z
Press
will flash on the screen and duration
of cooking will show on the screen one
after another.
X Z
Using
end of cooking time.
disappear but
flashing on the screen. This indicates that
an automatic cooking is programmed but
cooking has not started yet.
X Z
After 6 seconds of the last button push
or by pressing
will be completed, the display shows
the current time of day.
Auto cooking end
After the automatic cooking has been
completed,
the screen and the buzzer alarm will sound.
Any button press will stop the alarm sound but
the flashing symbol will go on till
is pressed. the buzzer alarm will sound for
7 minutes if not stopped.
FMO 45 GN 81 / FMO 45 GN 86
button twice, symbol
or buttons, adjust the desired
twice, the adjustment
will be steady on
(cooking
button once again,
or buttons, adjust the desired
symbol will
symbol will be still
, the adjustment
symbol will be flashing on
Power interrupts
„ „
„ „
Note: the flashing
the oven is inactive and you have to enter
the manual mode.
Child lock
This function is intented to prevent any
unauthorized modification of the timer settings.
„ „
„ „

Programmable options

Alarm tone
„ „
„ „
symbol
„ „
„ „
Brightness setting
Pressing and holding the
3 seconds will result in the currenly valid
brightness setting being showed. By pressing
and
8 available brightness setting. The last seen
brightness setting will be automatically
recorded as the selected setting.
„ „
button
Note: Default settings are highest.
Note: Programmable options are nonvolatile
and will be resident after any power failure.
– 14 –
After any interrupt of mains power, your
oven will be inactive after the power
is restored, for safety reasons.
After power on, the time digits and
symbol will flash and the time has
to be adjusted.
symbol indicates that
This function will be active, within
30 seconds after the last button press.
will appear.
To deactive it, press the
3 seconds. will disappear.
Pressing and holding the
3 seconds will result in the currenly
valid buzzer tone being produced.
By pressing and
may scroll through 3 available
buzzer tones.
The last heard buzzer tone will
be automatically recorded as the
selected tone.
After 6 seconds of the last button push
or by pressing ,
the adjustment is completed.
button for
buttons, you may scroll through
After 6 seconds of the last button push
or by pressing , the adjustment
is completed.
button for
button for
buttons, you