For Your Safety; Safety Instructions; Specified Conditions Of Use - Weller Zero Smog 4V Mode D'emploi

For your safety

Read these
instructions and the
accompanying safety
information carefully before
starting up the device and
starting work with the
device.
Keep these instructions in a
place that is accessible to all
users.

Safety instructions

The device has been manu-
factured in accordance with
state-of-the-art technology and
acknowledged regulations
concerning safety.
There is nevertheless the risk
of personal injury and damage
to property if you fail to obser-
ve the safety information set
out in the accompanying book-
let and the warnings given in
these instructions.
Always pass on the device
to third parties together with
these operating instructions.

Specified Conditions Of Use

Applied directives
The Weller Zero Smog volume
fume extraction system
extraction unit corresponds to
the EC Declaration of
Conformity in accordance with
the basic safety requirements
of Directives 2004/108/EC and
2006/95/EC.
14
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Thank you for the confidence you have shown in buying this device.
The device has been manufactured in accordance with the most rigo-
rous quality standards which ensure that it operates perfectly.
These instructions contain important information which will help you to
start up, operate and service the device safely and correctly as well as
to eliminate simple faults and malfunctions yourselves.
This appliance is not intended for use by persons (including children)
with limited physical, sensory or mental capabilities or insufficient ex-
perience and/or knowledge unless they are supervised by a person
who is responsible for their safety or have been instructed by them
in the safe use of the appliance.
Children should be supervised in order to ensure that they do not
play with the tool.
Check to see if the mains voltage matches the ratings on the name-
plate.
The Zero Smog is not permitted to be used for the extraction of inflam-
mable gases.
The organisation operating the unit is responsible for the observance of
the legal limits for noxious substances at the place of work.
The Zero Smog is only permitted to be placed in operation when in
correct working order.
The WELLER Zero Smog solder fume extraction unit is equipped
with a high-performance, maintenance-free turbine and, therefore, is
ideally suited to industrial continuous duty.
Zero Smog 4V, Zero Smog 6V
The unit is designed for use as a surface extraction unit and is not
suitable for extracting fumes directly from the soldering gun.
Intended use of the soldering station/ desoldering station also inclu-
des the requirement that you
adhere to these instructions,
„
observe all other accompanying documents,
„
comply with national accident prevention guidelines applicable at the
„
place of use.
The manufacturer will not be liable for unauthorised modifications to
the device.