For Your Safety - Weller WX 1 Mode D'emploi

For your safety

Thank you for the confidence you have shown in buying this device.
The device has been manufactured in accordance with the most rigorous quality standards which ensure that
it operates perfectly.
These instructions contain important information which will help you to start up, operate and service the device
safely and correctly as well as to eliminate simple faults and malfunctions yourselves.
Read these instructions and the accompanying safety information carefully before starting up the
device and starting work with the device.
Keep these instructions in a place that is accessible to all users.
Warning!
The device has been manufactured in accordance with state-of-the-art technology and acknowledged regula-
tions concerning safety. There is nevertheless the risk of personal injury and damage to property if you fail to
observe the safety information set out in the accompanying booklet and the warnings given in these instruc-
tions. Always pass on the device to third parties together with these operating instructions.
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
Specified Conditions Of Use
Use the soldering station / desoldering station / hot air station exclusively for the purpose indicated in the
operating instructions of soldering and desoldering under the conditions specified herein.
Intended use of the soldering station/ desoldering station also includes the requirement that you
adhere to these instructions,
„
observe all other accompanying documents,
„
comply with national accident prevention guidelines applicable at the place of use.
„
The manufacturer will not be liable for unauthorised modifications to the device.
Applied directives
This device conforms to the specifications of the EC Declaration of Conformity with Directives 2004/108/
EC, 2006/95/EC and 2011/65/EU (RoHS).
Disposal
Do not dispose of electric tools together with household waste material! In observance
of European Directive 2002/96/EC on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end
of their life must be collected separately and returned to an environmentally compatible
recycling facility.
30
Electric shock and risk of burns
Connecting the control unit incorrectly poses a risk of injury due to electric shock
and can damage the device. Risk of burns from the soldering tool while the
control unit is operating.
Carefully read the attached safety information, the safety information accompa-
„
nying these operating instructions as well as the operating instructions for your
control unit before putting the control unit into operation and observe the safety
precautions specified therein.
Always place the soldering tool in the safety rest while not in use.
„
Do not direct hot air soldering tools at people or inflammable objects.
„