About These Instructions; For Your Safety - Weller WDH 10T Mode D'emploi

WDH 10T/20T
Contents

1 About these instructions........................................................... 3

2 For your safety......................................................................... 3

3 Scope of supply ....................................................................... 4
4 Device description.................................................................... 4
5 Initial operation of the switching holder..................................... 5
6 Operating the device................................................................ 6
7 WDH 10T/20T: maintenance and care ..................................... 7
8 Fault messages and fault elimination ....................................... 7
9 Accessories ............................................................................. 7
10 Disposal................................................................................... 7
11 Warranty .................................................................................. 8
1 About these instructions
Thank you for placing your trust in our company by purchasing the
Weller WDH 10T/20T. Production was based on stringent quality
requirements which guarantee the perfect operation of the device.
These instructions contain important information for safe and correct
initial operation of the switching holder WDH 10T/20T, including
continued operation, maintenance and self-correction of simple
faults.
Read these Operating Instructions completely prior to initial
operation of the device and before starting work with the
switching holder WDH 10T/20T.
Ensure that these instructions are accessible to all users.
1.1 Applied directives
The Weller switching holder WDH 10T/20T complies with the
specifications of the EC Declaration of Conformity based on
Directives 89/336/EEC and 73/23 EEC.
1.2 Further applicable documentation
− Operating Instructions of your control unit including the
accompany booklet on Safety Instructions
− Operating Instructions of your soldering tool
2 For your safety
The switching holder WDH 10T/20T has been manufactured in
accordance with state-of-the-art technology and the recognised
technical safety regulations. In spite of this, there is a risk of injury
and damage to property if the safety instructions in the enclosed
safety booklet and the warning notes in these Operating Instructions
3-8