Operation With The Remote Control Unit; Automatic Operation - Airwell IU-MINV-HW-9H Mode D'emploi

1. Automatic Operation

STEP 1 Press the MODE selector button and select
STEP 2 Press the ON/OFF button and switch the air conditioner ON.
STEP 3 Press the temperature setting buttons (TEMP .).
The air conditioner starts operating after automatically selecting the type of operation
—whether heating, drying (dehumidifying) or cooling—that suits the conditions in the
room, and automatically adjusting the temperature, fan speed and airflow direction.
Type of operation
Heating
Drying
Cooling
Each time one of the temperature setting buttons (TEMP .) is pressed, the temperature is
changed by 1 °C.
12
Operation with the Remote Control
Unit
Standard temperature settings during automatic operation
Standard temperature setting
20 °C to 26 °C range
(The exact temperature depends on the prevailing temperature
when the unit starts operating.)
The temperature can be changed from +4 °C (higher) to
–4 °C (lower) from the standard temperature setting.
(The upper limit during cooling is 30 °C.)
STEP 2
STEP 3
STEP 1
(AUTO).
24 °C
27 °C
OI-757-12EG