Graphic Equalizer - Aiwa XH-A1000 Mode D'emploi

GRAPHIC EQUALIZER

SELECTING THE PROGRAMMED
EQUALIZATION CURVE
This unit provides the following 5 different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
LATIN: Accented higher frequencies for latin-type music
CLASSIC: Enriched sound with heavy bass and fine treble
JAZZ: Accented lower frequencies for jazz-type music.
GEQ
MULTI
JOG
1 Press GEQ.
The current mode is displayed.
2 Within 4 seconds, turn MULTI JOG or press f
or g to select a desired mode. The modes are
displayed cyclically as below.
LATIN
ROCK
POP
Program mode
GEQ M5 GEQ M4
Manual mode
The mode will be automatically set after 4 seconds.
To cancel the selected mode
Press GEQ twice so that "GEQ OFF" is displayed.
To select with the remote control
Press GEQ repeatedly until the desired program mode is
displayed. Each mode and "GEQ OFF (cancel)" appear cyclically.
12
ENGLISH
JAZZ
CLASSIC
GEQ M3 GEQ M2 GEQ M1
SETTING A NEW EQUALIZATION CURVE
MANUALLY
GEQ FREQ
(HIGH)
GEQ FREQ
(LOW)
MULTI
JOG
The equalization curve can be customized to suit your preference.
1 Press GEQ FREQ (LOW).
The lowest level frequency indicator flashes for 8 seconds.
GEQ
2 Within 8 seconds, turn MULTI JOG to adjust the
level of the lowest frequency.
f,g
3 Press GEQ FREQ (HIGH).
The highest level frequency indicator flashes for 8 seconds.
4 Within 8 seconds, turn MULTI JOG to adjust the
level of the highest frequency.
The frequency level indicators between the lowest and the
highest are adjusted accordingly.