Cd Playing; Basic Operations - Aiwa XH-A1000 Mode D'emploi

CD PLAYING

BASIC OPERATIONS

LOADING DISCS
DISC
CHANGE
Press CD, then press zCD OPEN/CLOSE to open
the disc compartment. Load disc(s) with the label
side up.
To load one or two discs, place the discs tray 1 and tray 2.
To load three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
After placing the discs, press zCD OPEN/CLOSE to close
the disc compartment.
The display shows the information of the disc to be played.
Total number of tracks
Tray number of the disc to be played
CD
zCD OPEN
/CLOSE
Total playing time
PLAYING DISCS
dDIRECTION/
PRESET
MULTI
JOG
DISC
DIRECT PLAY
Load discs.
To play all discs in the disc compartment (continuous
play), press d.
Play begins with the disc on tray 1.
The indicator of DISC DIRECT PLAY flashes to indicate the disc
being played.
Number of track
being played Elapsed playing time
To play one disc only (single disc play), press one of
DISC DIRECT PLAY 1-3.
The disc with the selected tray number is played once.
Only the indicator of the selected DISC DIRECT PLAY flashes.
Number of track
being played
Elapsed playing time
To play with the remote control
Press DISC DIRECT PLAY, then press one of the numbered
buttons 1-3 within 3 seconds to select a disc.
To stop play, press s.
To pause play, press a. To resume play, press again.
To search for a particular point during playback, keep f
or g pressed and release the button at the desired point.
To skip to the beginning of a track during playback, turn
MULTI JOG or press f or g repeatedly.
To remove discs, press zCD OPEN/CLOSE.
You can only remove the two discs that face you. When the
disc(s) to be removed does(do) not face you, press DISC
CHANGE repeatedly.
CD EDIT/
CHECK
0-9,+10
CD
zCD
OPEN/
CLOSE
c/d
f,g
s
DISC
DIRECT
PLAY
En
Selected
disc tray
number
17
ENGLISH