Sound; Audio Adjustments - Aiwa XH-A1000 Mode D'emploi

SOUND

AUDIO ADJUSTMENTS

T-BASS
BBE
PHONES
VOLUME
VOLUME CONTROL
Turn VOLUME on the main unit, or press VOL N
or M on the remote control.
The volume level is displayed as a number from 0 to MAX (50).
The volume level is automatically set to 20 when the power is
turned off with the volume level set to 21 or more.
To change the left/right balance
Press MANUAL SELECT on the remote control. L/R is displayed
for 2 seconds. Press f f or g f f f
these 2 seconds.
• The DOLBY PRO LOGIC (page 24) and the DOLBY DIGITAL
SURROUND (page 25) front speakers level is also changed.
Using the headphones
Connect headphones to PHONES jack with a stereo standard
plug (ø6.3 mm, 1 / inch).
4
No sound is output from the speakers while the headphones are
plugged in.
• When the headphones are plugged in, the DSP SURROUND
system (page 13), the DOLBY PRO LOGIC (page 24) and the
5.1CH (page 25) do not function.
MANUAL
SELECT
T-BASS
VOL /
f,g
g on the remote control within g g g
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
It also enriches the Karaoke function to make your voice sound
clear and pleasant.
Press BBE.
Each time it is pressed, the level changes. Select one of the
three levels or the off position to suit your preference.
NOTE
When playing back a tape recorded with BBE, it is recommended
that BBE be set to off to avoid distorted high frequency sound.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels or the off position to suit your preference.
NOTE
Low-frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low-frequency sound is already
emphasized. In this case, cancel the T-BASS system.
En
11
ENGLISH