Table Des Matières - Aiwa XH-A1000 Mode D'emploi

Outdoor Antenna
1 Power lines - When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding - Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
Antenna Grounding According to the National Electrical Code
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have got inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE
UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
TABLE OF CONTENTS
PREPARATIONS
CHECK YOUR SYSTEM AND ACCESSORIES ................. 4
BASIC CONNECTIONS ...................................................... 4
CONNECTING OTHER EQUIPMENTS .............................. 6
CONNECTING A DVD PLAYER ......................................... 8
REMOTE CONTROL ........................................................... 9
BEFORE OPERATION ........................................................ 9
SOUND
AUDIO ADJUSTMENTS .................................................. 11
GRAPHIC EQUALIZER .................................................... 12
DSP SURROUND ............................................................. 13
RADIO RECEPTION
MANUAL TUNING ............................................................ 14
PRESETTING STATIONS ................................................ 15
TAPE PLAYBACK
BASIC OPERATIONS ...................................................... 16
CD PLAYING
BASIC OPERATIONS ...................................................... 17
PROGRAMMED PLAY ..................................................... 19
RECORDING
BASIC RECORDING ........................................................ 20
AI EDIT RECORDING ...................................................... 21
PROGRAMMED EDIT RECORDING ............................... 22
DOLBY SURROUND
ADJUSTING SPEAKER LEVEL ...................................... 23
PLAY WITH DOLBY PRO LOGIC .................................... 24
LISTENING TO DOLBY DIGITAL SURROUND SOUND ...... 25
KARAOKE
MICROPHONE MIXING ................................................... 26
CD KARAOKE PROGRAM .............................................. 28
CLOCK AND TIMER
SETTING THE CLOCK ..................................................... 29
SETTING THE SLEEP TIMER ......................................... 29
SETTING THE TIMER ...................................................... 30
GENERAL
CARE AND MAINTENANCE ........................................... 31
SPECIFICATIONS ............................................................ 32
TROUBLESHOOTING GUIDE ......................................... 33
PARTS INDEX ................................................... Back cover
En
3
ENGLISH