Hendi 860502 Mode D'emploi page 5

Faults
Fault
Appliance does not work
Appliance does not reach the set
temperature
Buzzer alarms
Technical data
Input Voltage: 230-240 V/50 Hz
Power: 450 - 490W
Capacity: 8 Litres
Parts
Possible cause
No power at the socket
The plug is not plugged (correctly)
into the power point
Heating element faulty
Control unit faulty
Heating element fuse faulty
Heating element overheat
Possible solution
Check the fuse
Check the plug
Contact the supplier
Contact the supplier
Contact the supplier
First, check if water level is below
the "MIN" mark.
If alarm is still ON after cool down,
contact the supplier for aftersales
service
EN
5