Ibiza Light COMBI-STUV Manuel D'utilisation page 4

FL**
2
Strobe Mode
PU**
3
UV Mode
4 Au 1
5 Au 2
S1**
Sound Mode 1
6
(No Music,
work slow)
S2**
Sound Mode 2
7
(No Music,
Black out)
8 A***
Set DMX Address code:
1. Enter into the menu by pressing the MENU button. Select d001 via the up and down keys and press
ENTER. Modify the value via the up and down keys. Press ENTER to save and exit, or press the MENU
button to exit without saving.
2. Enter into menu by pressing the MENU button, select among a variety of operating codes via the
UP/DOWN keys. Press ENTER to save and run or MENU to leave the menu and return to the operating
modes.
DMX Connection
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
DMX connector configuration
Termination reduces signal errors. To avoid signal transmission problems and interference, it is always
advisable to connect a DMX signal terminator.
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
© Copyright LOTRONIC 2018
FLoF Off, No Strobe
FL 1~9 Strobe, Value +, Strobe -
PUON UV ON, LA**\LE**\FL** mode are available
PUOF UV OFF, LA**\LE**\FL**mode are available
Au 1 Fast Auto Mode 1
Au 2 Slow Auto Mode 2
S101~S120 Sound Mode
Strobe, Sound Sensitivity adjustment,
uoL1~uoL9
Value +,Sensitivity +
S201~S220 Sound Mode
Strobe, Sound Sensitivity adjustment, Value
uoL1~uoL9
+,Sensitivity +
A001~A512 DMX/SLAVE MODE
INPUT
COMBI-STUV
COMMON
DMX +
DMX-
Press "Enter" to confirm
Press "Enter" to confirm
Resistance 120 ohm
1/ 4w between pin 2
(DMX-) and pin 3 (DMX+)
of the last fixture.
4