MBM FRBE74T Manuel D'installation Et D'utilisation page 41

TROUBLESHOOTING
Whenever the appliance does not work properly, try to solve the less
serious problems using this table.
FAULT
The appliance does not
turn on.
The cooking compart-
ment is stained.
The light indicators do
not turn on.
The fryer does not heats
The fryer don't cooks
correctly
If the problem cannot be resolved, turn the appliance off and shut all the
supply valves. Then contact authorized customer service.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
The master switch is not
connected.
The residual current de-
vice or circuit breaker
has tripped.
Quality of the water.
Ineffective detergent.
Insufficient rinsing.
The master switch is
•
not connected.
The residual current
•
device or circuit brea-
ker has tripped
No power supply
•
Safety thermostat
•
Heating element
•
broken
Contactor switch
•
broken
Working thermostat
•
broken
Heating element not
•
positioned correctly
Heating element mi-
•
croswitch broken
Heating element
•
broken
Contactor switch
•
broken
- 19 -
MAINTENANCE
INTERVENTION
- Connect the master
switch.
- Contact authorized te-
chnical assistance
Filter the water (Contact
authorized technical as-
sistancer).
Use the recommended
detergent.
Rinse once again.
Connect the master
•
switch
Contact authorized te-
•
chnical assistancer
Check power supply
•
inlet
Contact authorized te-
•
chnical assistance
- Contact authorized te-
chnical assistance
8.
EN