REMEHA iSense Notice D'utilisation page 43

Faultcode - F214
Display text
Solution
Faultcode - F215
Display text
Solution
Faultcode - F216
Display text
Solution
Incorrect room temperature reading
Room temperature is out of measuring range or sensor is defective.
Room temperature reading is incorrect. If the room temperature is
between -5°C and 65°C, the temperature sensor may be faulty.
Contact your installer.
Controller failure
Internal fault. Controller failure.
Contact your installer.
No connection with base station (RF only)
No communication with base station.
Check whether the base station for the boiler is on and is functioning
correctly (consult the transmitter manual if necessary). If there is no
connection between the controller and base station, then restore the
connection as follows:
- Put the base station in connection mode (consult the base station
manual for this).
- On the controller select Menu > Settings > Users > Connection.
If this does not solve the problem, look for another location for the
controller and/or base station or remove obstacles that could interfere
with the RF signal.
is lit up.
is lit up.
and are lit up.
EN
43