Room Sensor (For Controller Rf Only); Prior To First Use; Setting Language, Time And Date; Default Setting - REMEHA iSense Notice D'utilisation

Consult the documentation for your boiler for information on connecting an outside temperature
i
sensor.

3.4 Room sensor (for controller RF only)

An RF room sensor is available for the controller RF as an option. This sensor replaces the internal
controller sensor.
4. Prior to first use

4.1 Setting language, time and date

The menu for selecting the language (international version) or setting the time (Dutch version)
appears when you connect the controller.
1. Select the desired language if applicable by turning button C and then push button C to confirm.
2. Follow the instructions on the display to select the time, year, month and day.
The controller is now ready for use. After installation, the default program is activated
(see paragraph 4.2). The temperature is now controlled by this clock program.
The controller automatically switches between summer time and winter time settings.
i

4.2 Default setting

Room control
The controller is set to room control by default. This means that the flow temperature of the central
heating water is controlled by the temperature in the room where the controller is installed. Weather-
EN
31