Select Menu Language; User Settings - Multiplex POWER PEAK TWIN EQ-BID 1000W Notice D'utilisation

5.2

SELECT MENU LANGUAGE

red language chosen. Pressing "ENTER" will activate and store the new language setting. red language chosen Pressing
Then the System Start Display will appear for a short time followed by the Memory View
screen.
5.3

USER SETTINGS

These functions are selected v These functions are selected via the "DEC" and "INC" buttons and activated using the
"ENTER" button. Thereafter, changes can be made using the "DEC" or "INC" buttons. Now
confirm the new settings with "ENTER".
Also the User Name which appears in the Start Display can be set up as required. To be
able to enter a name, highlight the first character with "DEC" button and select with the
"ENTER" button. The cursor will now move to the character field. Using the "DEC" or "INC"
buttons, now the required character can be selected and set using the "ENTER" button.
Proceed using the above procedure until the name is complete.
Once the correct parameters have been entered press the 'ESC' button to continue to the
main screens for outputs 1 or 2.
Operating Instructions
Power Peak ® Twin EQ-BID
The Power Peak ® Twin EQ-BID charger software con-
tains multi-lingual menu navigation. To select the desired
language, before connecting the power supply, press and
hold down the "ENTER" button. The screen display shown
allows selection of the desired language. Using the "INC"
and "DEC" buttons, the cursor can be moved and the desi-
Press and hold the "MODE" button before connecting the
charger to the power supply to enter the User Settings
menu.
To change the lighting settings, the charger software fea-
tures adjustable contrast (0-15) and backlight (On/Off).
10
44
# 30 8563