Battery Data Display; Cycle Data Display - Multiplex POWER PEAK TWIN EQ-BID 1000W Notice D'utilisation

5.7

BATTERY DATA DISPLAY

Parameter
Input voltage
Output voltage
Battery temperature
Maximum temperature
Charge time
Discharge time
Internal resistance
5.8

CYCLE DATA DISPLAY

the "D" line the average battery the "D" line the average battery voltage.
To be able to see all cycle data (up to 10 possible), press the "DEC" or "INC buttons to
select the required cycle.
Operating Instructions
Power Peak ® Twin EQ-BID
Use the "MODE-/ESC" buttons to switch between the data
in the menu. This screen shows all relevant data concer-
ning the charger and battery.
The table summarises all the of the Parameters that may
be used.
Explanation
Display of the supply voltage
Display of the current battery voltage
Instantaneous battery temperature
Maximum battery temperature
Last charge time
Last Discharge time
Internal resistance of the battery
Use the "MODE-/ESC" buttons to switch between the data
in the cycle menu. All relevant data can be seen here for
the charge-/discharge process.
The Charge (C) or Discharge (D) lines display the both
the charged-in or discharged capacity of the battery.
Additionally, the "C" line will display the highest voltage and
18
52
# 30 8563