Using The Charger For The First Time; Selecting The Menu Language - Multiplex POWER PEAK E7 Notice D'utilisation

5. USING THE CHARGER FOR THE FIRST TIME
Connect the Power Peak E7 EQ-BID to a 12 V car battery, taking
®
care to maintain correct polarity, or to a 230 V AC socket using
the mains lead.
The company name and device name are displayed. The display
then changes, and the "Memory name" menu appears.
MULTIPLEX
POWER PEAK D7
Note:
If a 230 V mains supply is present, this should always be used, as
efficiency is then higher.

5.1 SELECTING THE MENU LANGUAGE

(user setup)
Language : English
Rest Time : 2 min
Safety Cut : OFF
Safety Time : 1 min
Capa Ct : OFF
Capa value : 100 mAh
Key Beep : ON
The Power Peak E7 EQ-BID battery charger features a multi- ®
lingual menu system.
If you wish to change the set language, press the "STOP / ESC"
button to select the "USER SETUP" menu (user settings).
Pressing the "START / ENT." button marks the "LANGUAGE"
parameter.
Use the "+" or "-" button to select your preferred language.
Press the "START / ENT." button to set the new language.
Operating Instructions
Power Peak E7 EQ-BID
®
20
6
# 30 8127