Invacare Bariatric Trapeze BARTRAP Manuel D'utilisation page 3

3.2 Adjusting the Trapeze
WARNING!
Risk of Injury or Damage
To avoid injury or damage from instability or misuse:
– ALWAYS rotate Trapeze so the grab bar is directly above the individual using the grab bar. Grab bar should be grasped with both
hands and pulled straight down. DO NOT pull grab bar at an angle.
– Ensure that the trapeze clamp is securely tightened before using the trapeze.
– Ensure that the quick release pin is securely locked in place before using the trapeze.
Height
1. Position the desired chain link onto the free "S" hook on the trapeze clamp (Detail "A").
Position
1. Loosen trapeze knob by turning counterclockwise (Detail "A").
2. Slide the clamp to desired position on the boom tube.
3. Secure the trapeze clamp to the boom tube by turning the knob clockwise.
Rotation
The mast and boom tube can be rotated to three positions.
1. To adjust the rotation, pull out the quick release pin (Detail "B").
2. Move the trapeze to the desired position. There are three holes to choose from as shown in Detail "C".
3. Let go of the quick release pin once the trapeze is in the desired position. You should hear an audible "click" as the quick release pin
enters one of the three holes and locks into place.
DETAIL "C"
3.3 Trapeze Placement
1. Position the trapeze at the head of the bed so the boom tube hangs over the bed.
Trapeze base positioning is dependant upon width of the bed.
WARNING!
Risk of Injury or Damage
Failure to lock bed casters can result in bed movement during trapeze use and result in possible injury or property damage.
1106663-F~02
DETAIL "B" DETAIL "A"
3