Using Restraint Straps - Stryker Stair-PRO 6250 Manuel D'utilisation Et D'entretien

USING RESTRAINT STRAPS

Figure 2
Cross-Chest Configuration
WARNING
Always use all restraint straps to secure the patient on the chair. An unrestrained patient may fall from the chair and be
injured.
The restraints can be used in two configurations.
For the cross-chest configuration (Figure 2): Buckle the chest restraints in an "X" pattern across the patient's chest.
For the chest and lap configuration (Figure 3): Buckle one restraint across the patient's chest and the other across
the patient's lap.
For either configuration: Match up the color coded restraints and buckle the ankle restraint across the patient's legs.
To avoid damage to the buckles and straps, keep the restraint straps buckled when the chair is not being used with a
patient.
When attaching the restraint straps to the chair, remember the attachment points must provide strong anchorage and
proper restraint position while not interfering with equipment and accessories.
www.stryker.com
Operation Guide
Figure 3
Chest and Lap Strap
Configuration
6250-001-161 REV D
Vinyl Seat
Top View
ABS Seat
Top View
Figure 4
Lap Strap
Attachment Points
Return To Table of Contents
1-15
English