Setup Procedures - Stryker Stair-PRO 6250 Manuel D'utilisation Et D'entretien

Setup Procedures

English
Unpack the cartons and check all items for proper operation. It is important that the Stair-PRO ® Stair Chair is working
properly before it is put into service. Have a qualified service person use the following list and the operation instructions
to check the chair before it is put into service.
• All fasteners secure (reference all assembly drawings).
• All welds intact, not cracked or broken.
• No bent or broken tubing or sheet metal.
• No debris in wheels.
• All wheels secure and rolling properly.
• Chair unfolds and locks properly.
• No rips or cracks in seat or backrest.
• Patient restraints intact and working properly.
• Wheel locks operating properly.
• Foot end lift handles extend and lock properly.
• Head end lift handles fold and unfold.
• Front casters secure, rolling and swiveling properly (if equipped).
• Upper control handle extends and locks in all positions (if equipped).
• Stair-TREAD™ system unfolds and locks (if equipped).
• Track belts roll properly (if equipped).
• Optional accessories intact and operating properly.
The storage compartment on the vehicle in which the Stair-PRO Stair Chair will be transported must be large enough
®
to accommodate the folded dimensions of the chair (see page 1-5).
When necessary, modify the vehicle to fit the chair. Do not modify the chair.
WARNING
Do not modify the Stair-PRO ® Stair Chair. Modifying the chair can cause unpredictable operation resulting in injury to the
patient or operator. Modifying the chair will also void its warranty.
Return To Table of Contents
1-10 6250-001-161 REV D www.stryker.com