Turning On The Power; Auto Power Off - Canon EOS 6D Mark II Mode D'emploi

Turning on the Power

If you turn on the power switch and the date/time/zone setting
screen appears, see page 42 to set the date/time/zone.
Automatic Sensor Cleaning
Even during the sensor cleaning, if you press the shutter button
halfway (p.49), cleaning operation will be stopped, and you can take
a picture immediately.
If you repeatedly turn the power switch <1>/<2> at a short
interval, the <f> icon may not be displayed. This is normal and
not a malfunction.

3 Auto Power Off

To save battery power, the camera turns off automatically after
approx. 1 minute of non-operation. To turn on the camera again, just
press the shutter button halfway (p.49).
You can change the auto power off time with [52: Auto power off]
(p.64).
40
<1> : The camera turns on.
<2> : The camera is turned off and
does not function. Set the
power switch to this position
when not using the camera.
Whenever you set the power switch
to <1> or <2>, sensor cleaning
will be performed automatically. (A
small sound may be heard.) During
the sensor cleaning, the LCD monitor
will display <f>.