Canon EOS 6D Mark II Mode D'emploi page 136

3 Setting Noise ReductionN
Long Exposure Noise Reduction
For images exposed for 1 sec. or longer, noise (dots of light and
banding) typical of long exposures can be reduced.
Auto
For exposures of 1 sec. or longer, noise reduction is performed
automatically if noise typical of long exposures is detected. This
[Auto] setting is effective enough in most cases.
Enable
Noise reduction is performed for all exposures of 1 sec. or longer.
The [Enable] setting may reduce noise that cannot be detected with
the [Auto] setting.
134
Select [Long exp. noise
1
reduction].
Under the [z3] tab, select [Long
exp. noise reduction], then press
<0>.
Set the desired setting.
2
Select the desired setting, then press
<0>.
Take the picture.
3
The image will be recorded with noise
reduction applied.