Emptying The Container - Starmix ISP Série Notice D'utilisation

▶ Remove the suction hose from the liquid before emptying.
▶ After switching off, a small quantity of water can flow back out of
the hose, as a result of the high suction level and the favourable
flow condition in the container.
▶ After wet vacuum cleaning insert dry filters for picking up dry
dust.
When changing frequently between dry and wet vacuum
cleaning, use a second set of filters, preferably polyester folded
filter cartridges.
6 Permanent filter cleaning
The vacuum cleaner is fitted with an electromagnetic filter cleaning
system, which can be used to clean any attached dust from the
filter cartridges.
The folded filter cartridges are cleaned alternately one after the
other so that continuous work is guaranteed.
Continuous monitoring of the filter filling level through differential
pressure measurement, for an absolutely precise on-demand filter
cleaning during the operation.
Thereby constant high air flow cleaning guaranteed during the
operation, even for critical types of dust.
dif. = 0
dif. = max.
26 - en
NOTE
7

Emptying the container

Only permitted for dust with workplace exposure limits > 1 mg/m³.
▶ Switch off the vacuum cleaner, pull out the mains plug.
▶ Open the latches.
▶ Remove the cover and suction hose from the container.
▶ Empty the container by pouring out.
7.1 Dispose of the fleece filter bag
(see Quick Reference Guide
▶ Switch off vacuum cleaner.
▶ Disconnect mains plug.
▶ Wear appropriate breathing mask.
▶ Remove suction hose.
▶ Close off intake socket with cap.
▶ Open side latches.
▶ Remove top section.
▶ Carefully pull the flange off the intake socket and close off the
flange.
▶ Dispose of gathered material in accordance with legal require-
ments.
7.2 Dispose of the PE emptying and disposal
bag
(see Quick Reference Guide
▶ Set switch to position >AR<.
↳ Folded filter cartridges are cleaned automatically.
↳ Residual dust in the filters falls into the bag.
▶ Switch off vacuum cleaner.
▶ Disconnect mains plug.
▶ Wear appropriate breathing mask.
▶ Remove suction hose.
▶ Close off intake socket with cap.
▶ Open side latches.
▶ Carefully close the PE emptying and disposal bag with the
enclosed sealing tape.
▶ Carefully pull the flange off the intake socket and close off the
flange.
▶ Carefully remove the PE emptying and disposal bag from the
container.
▶ Dispose of gathered material in accordance with legal require-
ments.
7.3 Insert fleece filter bag
Only use fleece filter bags for dry vacuum cleaning.
▶ Slide the flange completely over the intake socket (see Quick
Reference Guide ).
NOTE
).
).
NOTE
* je nach Ausstattungsvariante