First Aid; Ec Declaration Of Conformity - Dolmar MS-246.4 U Instructions D'emploi D'origine

Never straighten or weld damaged cutting tools.
– Pay attention to the environment. Avoid unnecessary throttle operation for
less pollution and noise emissions. Adjust the carburetor correctly.
– Clean the equipment at regular intervals and check that all screws and nuts
are well tightened.
– Never service or store the equipment in the vicinity of naked flames.
– Always store the equipment in locked rooms and with an emptied fuel tank.
– When cleaning, servicing and storing the equipment, always attach the cover
to the cutting blade.
Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.
Do not perform any modifications to the equipment as this will endanger your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is
to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by DOLMAR.
Use of non-approved accessories and tools means increased risk of accidents.
DOLMAR will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and fixing devices of cutting
tools, or accessories.

First Aid

In case of accident make sure that a first-aid box is available in the vicinity of
the cutting operations. Immediately replace any item taken from the first aid box.
When asking for help, please give the following
information:
– Place of accident
– What happened
– Number of injured persons
– Kind of injuries
– Your name
For European countries only

EC Declaration of Conformity

The undersigned, Tamiro Kishima and Rainer Bergfeld, as authorized by Dolmar GmbH, declare that the DOLMAR machine(s):
Designation of Machine: Petrol Brushcutter
Model No./ Type: MS-246.4 U, MS-246.4 UE, MS-246.4 C, MS-256.4 C, MS-246.4 CE
Specifications: see "TECHNICAL DATA" table
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or standardized documents:
EN ISO 11806-1
The technical documentation is on file at:
Dolmar GmbH,
Jenfelder Straße 38, Abteilung FZ, D-22045 Hamburg
The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex V.
MS-246.4 U, MS-246.4 UE, MS-246.4 C, MS-246.4 CE:
Measured Sound Power Level: 108.5 dB
Guaranteed Sound Power Level: 111 dB
MS-256.4 C:
Measured Sound Power Level: 101.6 dB
Guaranteed Sound Power Level: 104 dB
27.11.2009
Tamiro Kishima
Managing Director
6
Rainer Bergfeld
Managing Director