Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use only accessories that fulfil the require-
ments and specifications listed in these
operating instructions.
If you need any accessories, check with your
dealer.
A Charger: ASC 55 (448848);
ASC Ultra (448855)
B Battery packs with different capacities:
Only purchase starmix- or CAS-compat-
ible battery packs with the voltage
matching your device: 5,2 Ah (448824);
8,0 Ah (448831)
C Suction hose (448787)
D Flat pleated filter (448800)
E Flat pleated filter (HEPA) (448817)
F Fleece filter bag (448794)
See www.starmix.de or the catalogue for a
complete range of accessories.
12. Repairs
Repairs to devices must be carried out by
qualified electricians only!
Use only original starmix spare parts.
You can download a list of spare parts from
www.starmix.de.
13. Environmental Protection
Do not allow battery packs to come into
contact with water!
Protect the environment, and do not
dispose of power tools and battery
packs with household waste. Observe
national regulations on separated collection
and recycling of disused machines, pack-
aging and accessories.
Discharge the battery pack in the power tool
before disposal. Prevent the contacts from
short-circuiting (e.g. by protecting them
with adhesive tape).
14. Technical Specifications
Explanatory notes on the specifications on
page 4.
Changes due to technological progress
reserved.
K
=dust class. As per EN 60335-2-69
Lxwxh=External dimensions
U
=Mains voltage
S
=Suction hose diameter
Ø
S
=Suction hose length
L
p
=max. vacuum (at the hose)
U1
p
=max. vacuum (at the blower)
U2
A
=Filter area
V
=Air flow rate (at the hose)
l/min1
V
=Air flow rate (at the blower)
l/min2
V
=max. container volume
Typical A-effective perceived sound levels:
L
=Sound pressure level
pA
L
=Acoustic power level
WA
K
, K
= Uncertainty
pa
WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity
with EN 60704.
Direct current
The technical specifications quoted are
subject to tolerances (in compliance with
the relevant valid standards).
ENGLISH en
19
Publicité
Table des Matières
