Initial Operation; Battery Pack; Carrying Strap; Switching On/Off - Starmix Quadrix L 18 V Notice D'utilisation

en ENGLISH
17 Twist-lock fluted filter
18 Fleece filter bag
19 Carry handle dust container
20 Latches
21 Connecting sleeve
22 Suction hose
23 Battery charger*
24 Spare battery pack *
25 Suction nozzles
* depending on equipment/not included in
scope of delivery

5. Initial Operation

Prior to use, check that you are using a
battery pack suitable for the device.
5.1 Use a fleece filter bag (18) (see fig. A,
page 4)
Switch off the device, remove the mains
plug and open the snap locks (2). Remove
the upper part (7) of the device from the
dust container (1).
We recommend using fleece filter bags for:
- Applications, where small amounts of fine
dust are created (e.g. spot-grinding and
grinding of paint and lacquer coatings,
extraction of drilling applications with
small diameters < 10 mm of short dura-
tion, etc.).
- Use of machines, such as: cordless
grinders, cordless mitre saws, cordless
jigsaws, etc.
When using a fleece filter bag the filter
cleaning is non-functional.
Insert a fleece filter bag (18) in the dust
container (1) as shown in fig. A, page 4. Fold
the carry handle of the dust container (19) in
direction of latches (20) and engage.
Replace the upper part (7) and close the
snap locks (2) .

5.2 Battery pack

Charge the battery pack (8) before use.
Recharge the battery pack if performance
diminishes.
The ideal storage temperature is between
10 °C and 30 °C.
Capacity and signal indicator (12):
16
- Press the button (13); the LEDs indicate the
charge level.
- The battery pack is almost flat and must be
recharged if one LED is flashing.
5.3 Removing and inserting the battery
pack
Remove: Press the battery pack release
button (9) and remove the battery pack (8) .
To insert: Slide the battery pack (8) in until it
engages.

5.4 Carrying strap

If required, hook the starmix carry strap into
both eyelets (4) left and right of the device.
Set the carry strap to the desired length.
Carrying:
Carry only without connected suction
hose (22) .
Carry the device only when switched
off.
The tool must be carried only with the
starmix carry strap.
The machine must NOT be carried with the
carrying strap around your neck.
6. The device

6.1 Switching on/off

Prior to switching on the vacuum cleaner,
the suction hose must be removed from
the housing to avoid overheating.
Prior to switching on the device set the
respective suction power via the rotary
switch (14):
"BOOST": high suction power
- working with a drill vacuum cleaner
adapter, recommended for profiled
surface such as e.g. carpets.
"ECO": medium suction power
- recommended for smooth surfaces,
cordless tools with low dust generation
(cordless grinders, cordless mitre saws,
cordless jigsaws, etc.).
"OFF": Off (transport lock)
- deactivates the corner switch (3).
Use the corner switch (3) to turn the
machine On/Off.
The suction power can also be changed with
the machine in operation.