Starmix Quadrix L 18 V Notice D'utilisation page 15

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Prior to switching on the vacuum
cleaner, the suction hose must be
remoed from the housing to avoid
overheating.
Make sure that the air exchange rate
is high enough if the exhaust air is
being fed back into the room (pay
attention to applicable national
regulations).
Caution! This device contains
dust that is harmful to health.
Discharge and maintenance opera-
tions (including disposal of the dust
collection containers) must only be
carried out by qualified specialists
wearing appropriate protective
clothing and equipment.
Warning - general danger!
Caution! Do not use the device
until you have read the oper-
ating Instructions.
WARNING - Operating staff must be
provided with appropriate instruc-
tion on how to use this vacuum
cleaner.
Warning sign for machines with dust
class L:
While the device is suitable for
extracting substances that pose a
slight threat to health, it is not appro-
priate for reducing wood dust in
inhaled air.
Dust from material such as paint
containing lead, some wood species,
minerals and metal may be harmful.
Contact with or inhalation of the
dust may cause allergic reactions
and/or respiratory diseases to the
operator or bystanders.
Certain kinds of dust are classified as
carcinogenic such as oak and beech
dust especially in conjunction with
additives for wood conditioning
(chromate, wood preservative).
Transport of li-ion battery packs:
The shipping of Li-ion battery pack is
subject to laws related to the
carriage of hazardous goods
(UN 3480 and UN 3481). Inform
yourself of the currently valid specifi-
cations when shipping li-ion battery
packs. If necessary, consult your
freight forwarder. Certified pack-
aging is available from starmix.
Only send the battery pack if the
housing is intact and no fluid is
leaking. Remove the battery pack
from the machine for shipping.
Prevent the contacts from short-
circuiting (e.g. by protecting them
with adhesive tape).
4. Overview
See page 4.
1 Dust container
2 Snap locks
3 Corner switch On/Off
4 Eyelet to attach a carry strap
5 Handle
6 Cover
7 Upper part
8 Battery pack *
9 Battery pack release button
10 Suction opening
11 Button for filter cleaning "PressClean"
(PC)
12 Capacity and signal indicator (battery
pack)
13 Capacity indicator button
14 Rotary switch BOOST/ ECO/ OFF
15 Unlocking mechanism cove
16 Fluted filter
ENGLISH en
15

Publicité

Table des Matières
loading

Table des Matières