Technical Data; Installation - Electrolux IK2805ZL Notice D'utilisation

2. If necessary, adjust the door. Refer to

"Installation".

TECHNICAL DATA

Dimension of the recess
Rising Time
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
POSITIONING
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
ELECTRICAL CONNECTION
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
3. If necessary, replace the defective door
Height
Width
Depth
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
VENTILATION REQUIREMENTS
The airflow behind the appliance must be
sufficient.
INSTALLATION OF THE CARBON
FILTER
The carbon filter is an active carbon filter
which absorbs bad odors and permits to
maintain the best flavour and aroma for all
gaskets. Contact the Service Center.
1780 mm
560 mm
550 mm
20 h
230-240 V
50 Hz
min.
200 cm
2
electrolux 67
min.
200 cm
2