Cleaning And Maintenance - Trebs Comfortcandy 99389 Mode D'emploi

 Once you have collected the cotton candy with the cone, hold the cone in a horizontal
position over the extractor head (C) while still rotating it with your fingers, making sure
all sugar has been collected.
 Repeat the above steps by adding another measure of candies or sugar into the extractor
head (C).
TROUBLESHOOTING AND HELPFUL TIPS
If your cotton candy is not flossing properly or is coming out with a brittle, "hay-like" texture,
follow these instructions:
 Insert only 1-2 candies at a time.
 Make sure candies or sugar are evenly placed on either sides of the extractor head.
 For best results, cut candies in small pieces before using.
 This appliance works with any kind of candy, except the following types:
o filled candies with hard sugar shells, gummy or chewy candies, sugar-pressed
candies, caramel candies
 Please allow 5 minutes to cool the machine after you finish five cotton candies.
 Clean the cotton candy maker after 2 or 3 cycles to keep the extractor head from
clogging and to ensure optimal results. If extractor head is not cleaned every couple
cycles, it will stop producing floss and results will be poor.
RECIPES
 With this appliance you can use hard candies or sugar according to taste. Try to mix
candies with different flavors together to obtain cotton candy with a very special taste!
For example, apple and cinnamon, or strawberry and orange, pineapple and lemon, etc...
 If you want colored cotton candy, use granulated sugar adding some drops of food
coloring, mix thoroughly and follow the instructions.
Look for nice cotton candy recipes on our website www.trebsshop.com

CLEANING AND MAINTENANCE

 Carry out disassembling and cleaning of the appliance only after it is completely cooled.
 After cooling, remove the extractor head (C) by firmly holding both sides and pulling
upwards.
 Remove the rim (A) and unlock the bowl (B) by rotating it clockwise and lifting it.
 Wash the items, including the cones, with warm water, then rinse and dry thoroughly.
 Use a non-abrasive, slightly damp sponge or cloth to clean the inside and outside part of
the appliance, then wipe with a nonabrasive towel.
10