Trouble Shooting Guide - ActSafe T1-16 Manuel Utilisateur

TRoubLE ShooTIng guIDE

If this guide does not solve your problems,
contact ActSafe Systems AB or an ActSafe
approved distributor.
No power when main switch is pressed
PROBABLE CAUSE
Lights are switched off, not showing if
the ascender is switched on/off.
The battery is flat.
No response to speed handle
PROBABLE CAUSE
The ascender is not switched on.
The remote control is switched on.
The battery is flat.
The ascender stops on ascent/descent
PROBABLE CAUSE
The ascender is overloaded.
The rope is jammed.
The battery is flat.
User's Manual T1-16 Tactical Ascender
REMEDY
Push the power button and operate the handle. Switch lights back
on when ascender is operating.
Recharge the battery.
REMEDY
Switch the power on.
Restart the ascender or wait for the remote to turn off after 10 se-
conds of inactivity.
Recharge the battery.
REMEDY
Ensure the load is not exceeding lifting capacity and restart
by return the handle to zero.
Clear the jam.
Recharge the battery.
TROUBLE SHOOTNG GUIDE
33