Remote Control Usage; Covert Mode - ActSafe T1-16 Manuel Utilisateur

Remote control usage

The power for the ascender needs to be
switched on.
1. Press any button on the remote to
activate it. (The green LED will flash
3 times before going steady if connec-
tion with ascender is successful).
2. Press the down/up button once for slow
speed, twice for fast speed.
3. Press the "Activate" button to ascend/de-
scend at selected speed and direction.

Covert mode

Switch on / off all LEDs by pressing the
"LIGHT" button on the control panel for
3 seconds.
In covert mode the lights can be
turned on for a glimpse of the ascender
status. Press the "LIGHT" button for less
than 3 seconds for the lights to tem-
porarily light up.
User's Manual T1-16 Tactical Ascender
1
CAUTION
To ensure reliable operation the remote needs
to be in the line of sight with the ascender.
DANGER
Always use the remote in combination with
stopper knots at each end of the rope.
2
RECOMMENDATION
Turn the lights on before putting it away for
storage, to avoid confusion whether the ascen-
der is turned on/off.
USAGE
3
23